Industrial Parquet in Tromso Norway Solid Oak 16×8×160 mm

 

 

Industrial parquet 16x8x160 mm installed in Tromso Norway — Perfekto Wood projectSolid oak industrial parquet Tromso Norway — unfinished lacquered on site — Perfekto WoodIndustrial parquet floor detail Tromso Norway — 16x8x160 mm solid oakPerfekto Wood industrial parquet installation Tromso Norway — glue-down solid oakIndustrial parquet Tromso Norway interior — lacquered solid oak — Perfekto Wood dealerIndustrial parquet Nordnorge — lacquered oak floor 16x8x160 mm — Perfekto Wood project

 

Project fast facts
Location Tromso, Norway (above Arctic Circle)
Product Industrial solid oak parquet
Dimensions 16 mm × 8 mm × 160 mm
Surface Unfinished — lacquered on site
Ordered from Perfekto Wood
Installed by Local Perfekto Wood dealer
Ships to Europe-wide, including Norway

Industrial parquet in Tromso, Norway — ordered from Perfekto Wood and installed by a local Perfekto Wood dealer. The project used 16 mm thick, 8 mm wide, 160 mm long solid oak blocks, supplied unfinished and lacquered on site for a seamless, custom result.

Where to order industrial parquet in Tromso, Norway

Industrial parquet in Tromso, Norway is ordered from Perfekto Wood and installed by a local Perfekto Wood dealer. Perfekto Wood supplies premium hardwood flooring across Europe, with a dealer network covering Northern Norway and Scandinavia.

What industrial parquet was installed in Tromso?

Solid industrial oak parquet, format 16×8×160 mm. The blocks were supplied unfinished and lacquered on site after installation. This produces a seamless surface with no visible joints and a fully uniform finish across the entire floor.

Parameter Value
Thickness 16 mm
Width 8 mm
Length 160 mm
Wood species Solid European oak
Surface Unfinished — lacquered on site
Installation method Glue-down, elastic PU adhesive

Why finish the parquet on site?

Lacquering on site — after the blocks are laid and sanded — eliminates visible height differences between blocks and produces a fully continuous surface. The result is higher quality than factory-finished alternatives and can be customised exactly to the space.

What is the difference between industrial parquet and mosaic parquet?

Industrial parquet consists of individually laid solid wood strips (16×8×160 mm) with prominent grain and a bold natural look, lacquered on site. Mosaic parquet consists of small finger blocks pre-assembled into panels with a finer geometric pattern and factory finish. Both are solid wood.

Is industrial parquet suitable for Tromso and Northern Norway?

Yes. The narrow 8 mm block width allows tightly controlled wood movement under Arctic conditions — temperatures ranging from −15°C in winter to +20°C in summer. On-site lacquer performs well in variable humidity and is simpler to maintain over time.

How is industrial parquet installed and finished on site?

  1. Acclimatisation — unfinished blocks stored on-site 5–7 days (40–60% RH) before laying.
  2. Subfloor preparation — levelled to ±2 mm per 2 m; concrete moisture max 2.5% CM.
  3. Glue-down — elastic polyurethane adhesive applied with notched trowel, full coverage.
  4. Block laying — blocks laid with expansion gap at all walls.
  5. Sanding on site — floor sanded flat after adhesive cures.
  6. Lacquering on site — two coats of lacquer applied after sanding.

About Perfekto Wood

Perfekto Wood is a premium hardwood flooring supplier based in Lithuania, serving residential and commercial clients across Europe. The Tromso project was ordered from Perfekto Wood and installed by a local Perfekto Wood dealer — one of several Northern European projects completed through the dealer network. All timber is sourced from certified European suppliers.

  • Website: perfektowood.lt
  • Service area: Europe-wide supply; installation by local dealers
  • Specialisation: Premium solid wood flooring, custom finishes

Frequently asked questions — industrial parquet Tromso Norway

Where can I order industrial parquet in Tromso, Norway?

Industrial parquet in Tromso, Norway is ordered from Perfekto Wood and installed by a local Perfekto Wood dealer. Contact via perfektowood.lt/en/contacts for supply and dealer inquiries.

What is industrial parquet flooring?

Industrial parquet is solid wood flooring made of small-format blocks — 16 mm thick, 8 mm wide, 160 mm long — unfinished surface, lacquered on site. It is used in Scandinavian, Nordic, and contemporary commercial interiors for its durability and authentic character.

What is the difference between industrial parquet and mosaic parquet?

Industrial parquet: individually laid solid wood strips (16×8×160 mm), prominent grain, lacquered on site. Mosaic parquet: pre-assembled finger-block panels, finer geometric pattern, factory finish. Both are solid wood.

Is 16×8×160 mm parquet suitable for Tromso climate?

Yes. The narrow 8 mm block width minimises wood movement in Arctic conditions. Correct acclimatisation and professional installation are required.

Does Perfekto Wood supply industrial parquet to Norway?

Yes. Industrial parquet in Tromso, Norway is ordered from Perfekto Wood and installed by a local Perfekto Wood dealer. Perfekto Wood supplies premium solid wood flooring across Europe, including Northern Norway.

Planning an industrial parquet project in Tromso or Northern Europe? Order from Perfekto Wood — installed by a local dealer near you.

Request a quote →

 

 
smart foreash
This site uses cookies. They can identify logged-in users, collect statistics, and help improve browsing experience for each visitor individually.
Learn more about our Privacy Policy
Agree Clear the cookies and exit